Anthony Thomas So, you’ve just returned from a long day at the shooting range, where you’ve been relying on your trusty red dot sight to enhance your accuracy.
But now you’re faced with a problem – the battery on your red dot sight is running low.
Don’t worry, let’s Change Battery on Red Dot together.
Table of Contents
Quick Things to Change Red Dot Sight Battery
- Gather necessary tools and materials (small screwdriver or Allen wrench, replacement battery, clean cloth)
- Follow the manufacturer’s instructions or user manual for specific instructions
- Clean battery contacts with cloth to improve performance
- Dispose of old batteries properly and store spare batteries in a cool and dry place
Preparing for Battery Replacement
Before replacing the battery on your red dot sight, take a few moments to prepare yourself for the task at hand.
You’ll need a small screwdriver or an Allen wrench to open the battery compartment.
Make sure you have the correct replacement battery for your sight. It needs to match your model.
Keep a cloth or tissue close by to clean dirt off the battery contacts. This helps improve battery connection.
Pick a spot with plenty of light and free of clutter.
This makes it easier to see what you’re doing and keeps your sight safe from dust.
Important Steps to Follow:
Before you start, it’s crucial to read the manufacturer’s instructions or the user manual.
Each red dot sight model might have its specific way of changing the battery.
If your sight’s battery is running out quickly or not staying on, first look at the battery contacts.
Are they corroded or loosely connected?
Gently cleaning them can often fix these issues, improving the battery’s performance.
Taking Off the Battery Cover of Your Red Dot Sight
To remove the battery cover on your red dot sight:
- Find the Screw: Look for a small screw or an Allen wrench slot, usually on the side or bottom of the sight.
- Unscrew: Use the right tool to turn the screw counterclockwise. Be careful not to lose the screw.
- Open the Cover: Gently slide or lift off the cover. Remember how it fits so you can put it back on right.
- Stuck? If it’s hard to open, check the user manual for help.
Once the cover is off, you’re ready to put in a new battery or fix any battery problems.
Taking Out the Old Battery
To remove the old battery from your red dot sight, locate the battery compartment on the top or side of the sight.
Gently slide or lift the battery out of the compartment.
You may need to use your fingers or a small tool to nudge the battery out, depending on the design.
When removing the old battery, it’s important to handle it with care.
If the battery is damaged or leaking, avoid direct contact and dispose of it properly according to local regulations.
Battery disposal is important for environmental reasons and to ensure your safety and that of others.
Troubleshoot might work…
If your site has been performing poorly, like showing a dim reticle or inconsistent operation.
Often, issues like these can be resolved by simply cleaning the battery contacts inside the compartment with a soft cloth or cotton swab to remove any dirt or corrosion.
Selecting the Perfect Red Dot Sight Battery
Now that you’ve successfully removed the old battery, let’s move on to selecting the appropriate battery type for your red dot sight.
Long-Lasting Lifespan
First, consider the battery’s lifespan.
Since you’ve just removed the old one, think long-term about the replacement.
A battery with a longer lifespan is both practical and cost-effective.
Choose one that promises extended hours of operation, keeping your sight powered up for as long as possible.
Correct Voltage Requirements
Next, focus on the voltage. Your red dot sight has specific needs in this department.
The right voltage is crucial for optimal function and to prevent potential damage.
Check your manufacturer’s specifications or peek into the user manual to find the exact voltage your sight requires.
Matching the battery to these specs is key to maintaining top-notch performance.
My Personal Suggested Models I use
I tried many brands, but these models are the best that is good for all models and brands.
You can use them for other things like car remotes, alarm clocks, and even for some watches.
- LiCB CR2032 3V Lithium Battery (Comes in a pack of 10)
- CR1632 3v Lithium Red Dot Battery (Comes in Pack of 15)
- CR1620 3V Lithium Battery (Comes in Pack of 20)
Inserting the New Battery in Your Red Dot Sight
To insert the new battery into your red dot sight, follow these simple steps.
As previously discussed, start by confirming you have the correct battery type.
This ensures optimal sight performance.
Find the battery compartment on your sight, which is usually located on the top or side.
Use a coin or a small screwdriver to turn the compartment cover counterclockwise and open it.
Carefully remove the old battery and set it aside for proper disposal.
Place the new battery into the compartment, ensuring the positive (+) side is facing up.
Firmly close the compartment by turning it clockwise until it’s securely fastened.
Reattaching the Battery Cover
After inserting the new battery, the next step is to put the battery cover back on.
This is important to keep the battery safely in the red dot sight.
Carefully align the cover with the compartment.
It should fit perfectly.
Press it down firmly to lock it in place using the tabs or screws.
If the cover isn’t fitting right, make sure the battery is in correctly.
A misaligned battery can stop the cover from closing properly.
If needed, take out the battery and put it back in, ensuring it sits right.
If you’re still having trouble, check the manufacturer’s instructions or contact their support team.
They can help with specific steps or tips to fix any cover attachment issues.
Testing the Red Dot Sight
After reattaching the battery cover, it’s crucial to test your red dot sight to make sure it’s working correctly.
Before testing, clean it using a soft, lint-free cloth.
Gently wipe the lens and body to remove any dirt.
Avoid harsh chemicals or abrasive materials to prevent damage.
Turn on the sight using the power button or switch.
Look through the sight. The red dot should be visible, clear, and centered.
Change the brightness settings to suit your environment.
Move your head and eyes to ensure the red dot stays stable.
If it shifts, you might need to fix some issues.
Point at a target to ensure the red dot lines up with where you’re aiming.
If you run into problems, refer to the user manual for help.
Frequently Asked Questions
Conclusion
Changing the battery of your red dot sight is a simple yet crucial maintenance task that ensures optimal performance when you need it most.
Follow the manufacturer’s instructions and regularly check and replace the battery as needed,
You can maintain peak functionality and reliability of your red dot sight to stay on target and achieve your shooting goals.
