Anthony Thomas 
Are you having trouble with your Aimpoint Pro Red Dot Sight? Youโre not alone. Many people face issues that can mess up their shooting experience. But donโt worry, I’m here to help.
The Aimpoint Pro is known for being tough and accurate. However, itโs not perfect and can sometimes have problems.
Imagine youโre about to take the perfect shot, but your sight flickers or doesnโt hold zero. It can be really frustrating.
In this article, weโll go over common problems with the Aimpoint Pro and how to fix them so you can get back to shooting accurately and reliably.
Table of Contents
7 Common Problems of Aimpoint Pro
Battery Life Issues
Some users find that the battery life is shorter than expected or the sight wonโt turn on even with a new battery.
This issue can be quite frustrating, especially when you’re in the middle of an important shooting session.
Sometimes, itโs a simple case of the battery not being installed correctly or might be with the battery contacts being dirty or corroded.
Solution:
- Check Battery Installation: Make sure the battery is put in correctly.
- Inspect Battery Contacts: Clean any dirt or rust on the contacts.
- Use Quality Batteries: Use good-quality batteries from trusted brands.
Extra Tips:
- Regular Checks: Check the battery area regularly for any signs of rust or damage.
- Spare Batteries: Keep extra batteries handy, especially if you use the sight a lot.
Flickering or Extra Dots
Sometimes, users see flickering dots or multiple dots in the sight, which can be distracting.
This can occur due to a variety of reasons, including dirt on the lens, incorrect brightness settings, or moisture inside the sight.
Flickering dots can be caused by high brightness settings, which might overwhelm the sight’s optics.
Multiple dots might appear due to internal reflections caused by dirt or moisture.
Solution:
- Clean the Lens: Dirt or smudges can cause problems. Clean the lens with a soft cloth.
- Adjust Brightness: High brightness can make dots flicker or multiply. Lower the brightness.
- Check for Moisture: Make sure thereโs no moisture inside the sight. Store it in a dry place.
Extra Tips:
- Use Lens Cleaner: Use a good lens cleaner for regular cleaning.
- Humidity Control: Use silica gel packs in your storage case to keep moisture away.
Mounting Problems
Some users have trouble mounting the sight or find it comes loose during use.
This can be particularly problematic during intense shooting sessions where stability and precision are crucial.
The issue can be because of improper installation, worn-out mounting hardware, or even from the sight being knocked around during transport.
Solution:
- Ensure Proper Mounting: Follow the instructions for mounting the sight.
- Use Thread Locker: Apply thread locker to the screws to prevent them from loosening.
- Inspect Mounting Hardware: Check the hardware regularly for any signs of wear or damage.
Extra Tips:
- Torque Wrench: Use a torque wrench to ensure screws are tightened correctly.
- Check Regularly: Make it a habit to inspect the mount before each use.
Losing Zero
The sight loses its zero after shooting or during transportation, affecting accuracy.
Losing zero can be caused by various factors, including loose mounting hardware or the sight being knocked out of alignment.
Solution:
- Re-tighten Mounting Screws: Make sure all screws are tightened properly.
- Use a Torque Wrench: For precise tightening, use a torque wrench.
- Check for Movement: Ensure the sight is firmly attached with no movement.
Extra Tips:
- Routine Checks: Check the sight after heavy use or transportation.
- Re-zeroing: Learn how to re-zero your sight quickly and efficiently.
Brightness Adjustment Issues
Some users find it hard to adjust the brightness settings or the sight doesnโt keep the chosen brightness level.
Brightness adjustment issues can stem from problems with the adjustment knob, a weak battery, or even internal electronic malfunctions.
Solution:
- Inspect Adjustment Knob: Make sure the knob works correctly and isnโt blocked.
- Replace Battery: A weak battery can cause brightness issues. Use a fresh battery.
- Factory Reset: Do a factory reset to recalibrate the sight.
Extra Tips:
- Smooth Operation: Use the adjustment knob regularly to keep it working smoothly.
- Fresh Batteries: Always use fresh, high-quality batteries for the best performance.
Moisture and Fogging
Moisture inside the sight can cause fogging, which obscures vision and affects accuracy.
This can be a significant issue in humid or wet conditions.
Fogging can occur when moisture gets trapped inside the sight, leading to internal condensation.
Moisture can enter the sight through small cracks or openings, especially if itโs exposed to rain or high humidity.
Solution:
- Desiccant Packs: Store the sight with desiccant packs to absorb moisture.
- Silica Gel: Use silica gel packs in the storage case to keep it dry.
- Proper Storage: Store the sight in a dry, cool place to prevent moisture buildup.
Extra Tips:
- Airtight Case: Use an airtight case for storage.
- Regular Checks: Check the sight regularly for signs of moisture.
Miscellaneous Issues
Other issues include sight picture distortion, parallax errors, or electronic malfunctions.
Sight picture distortion can occur due to lens misalignment or internal reflections.
Parallax errors happen when the reticle appears to move in relation to the target when you shift your eye position.
Electronic malfunctions can result from internal component failures or issues with the sightโs circuitry.
Solution:
- Regular Maintenance: Perform regular checks to ensure all parts are in good condition.
- Manufacturer Support: Contact Aimpoint customer support for persistent issues.
- Professional Inspection: Have the sight inspected by a professional if problems continue.
Extra Tips:
- Keep Records: Maintain a log for sight maintenance.
- Professional Help: Seek professional help when necessary.
Frequently Asked Questions (FAQs)
Conclusion
By understanding these common issues and knowing how to fix them, you can keep your sight working well.
Regular maintenance, proper storage, and using quality parts will help you get the most out of your Aimpoint Pro.
By tackling these problems early, you can enjoy your Aimpoint Pro Red Dot Sight and keep it performing at its best. Happy shooting!
